Excellent Quality N10675/Alloy b3 Stainless steel Products Plate
1.Product Description
We produce Hastelloy B-3, Alloy B3 Plates, Sheets, Coils, Strips, UNS N10675 Plates, Sheets, Coils, Strips, 2.4600 Plates, Sheets, Coils, Strips, Alloy B-3, Alloy B3 Plates, Sheets, Coils, Strips from china
We could produce Hastelloy B-3, UNS N10675, 2.4600 Plates/Sheets/Coils/Strips with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.
The thickness of Alloy B-3, UNS N10675, 2.4600 Plates/Sheets/Coils/Strips that we could do range from 0.05MM to 3MM
The surface finish of Alloy B-3, UNS N10675, 2.4600 Plates/Sheets/Coils/Strips that we could do is as follows: 2B / 2D / BA
The hardness of Hastelloy B-3, UNS N10675, 2.4600 Plates/Sheets/Coils/Strips that we could do is as follows: 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft
We can polish Hastelloy B-3, UNS N10675, 2.4600 Plates/Sheets/Coils/Strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our Hastelloy B-3, UNS N10675, 2.4600 plate, sheets, coils, strips can be polished on one side or two sides.
Our Hastelloy B-3, UNS N10675, 2.4600 Plates/Sheets/Coils/Strips are widely used in Chemical industry, Aerospace, Heat treating industry, Pulp and paper industry, Food processing, Nuclear Engineering, Gas turbine components and so on.
Please tell us the size of Hastelloy B-3, UNS N10675, 2.4600 Plates/Sheets/Coils/Strips that you need, we are glad to quote the best price
Stainless steel plate/Stainless steel sheet
Grade: Stainless Steel 200 series: AISI 201, AISI 202
Stainless Steel 300 series: AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 309S,AISI 310S
Stainless Steel 400 series: AISI 430, AISI 409L, AISI 443, AISI 439, AISI 441,AISI 444, AISI 436L
Chemical composition
| Grade |
C |
Si |
Mn |
P |
S |
Ni |
Cr |
| AISI 201 |
<=0.15 |
<=1.00 |
5.5-7.5 |
<=0.060 |
<=0.03 |
<=3.50-5.50 |
<=16.00-18.00 |
| AISI 202 |
<=0.15 |
<=1.00 |
7.5-10.0 |
<=0.060 |
<=0.03 |
<=4.0-6.0 |
<=17.00-19.00 |
| AISI 304 |
<=0.07 |
<=1.00 |
<=2.00 |
<=0.045 |
<=0.03 |
<=8.00-10.5 |
<=18.00-20.00 |
| AISI 316L |
<=0.03 |
<=1.00 |
<=2.00 |
<=0.045 |
<=0.03 |
<=12.00-15.00 |
<=16.00-18.00 |
| AISI 309S |
<=0.08 |
<=1.00 |
<=2.0 |
<=0.045 |
<=0.03 |
<=12.00-15.00 |
<=22.00-24.00 |
| AISI 310S |
<=0.08 |
<=1.00 |
<=2.00 |
<=0.045 |
<=0.03 |
<=19.00-22.00 |
<=24.00-26.00 |
| AISI 321 |
<=0.08 |
<=1.00 |
<=2.00 |
<=0.045 |
<=0.03 |
<=9.00-13.00 |
<=17.00-19.00 |
| AISI 409L |
<=0.08 |
<=1.00 |
<=1.00 |
<=0.045 |
<=0.03 |
<=0.50 |
<=10.50-17.50 |
| AISI 430 |
<=0.12 |
<=0.75 |
<=1.00 |
<=0.040 |
<=0.03 |
<=0.60 |
<=16.00-18.00 |
| AISI 436L |
<=0.025 |
|
|
|
|
|
<=16.00-19.00 |
| AISI 439 |
<=0.03 |
<=1.00 |
<=1.00 |
<=0.040 |
<=0.03 |
<=0.50 |
<=17.00-19.00 |
| AISI 441 |
<=0.015 |
<=1.00 |
<=1.00 |
<=0.040 |
<=0.03 |
<=0.30 |
<=17.50-19.00 |
| AISI 444 |
<=0.025 |
<=1.00 |
<=1.00 |
<=0.040 |
<=0.03 |
<=1.00 |
<=17.50-19.50 |
Mechanical property
| |
YIELD STRENGTH |
TENSILE STRENGTH |
EXTENSION |
HARDNESS |
|
|
| |
N/mm2 |
N/mm2 |
% |
HRB |
HV |
HB |
| AISI 201 |
>=270 |
>=520 |
>=40 |
<=100 |
<=253 |
<=241 |
| AISI 202 |
>=245 |
>=590 |
>=40 |
<=95 |
<=218 |
<=207 |
| AISI 304 |
>=205 |
>=520 |
>=40 |
<=90 |
<=200 |
<=187 |
| AISI 316L |
>=175 |
>=480 |
>=40 |
<=90 |
<=200 |
<=187 |
| AISI 309S |
>=205 |
>=520 |
>=40 |
<=90 |
<=200 |
<=187 |
| AISI 310S |
>= 205 |
>=520 |
>=40 |
<=90 |
<=200 |
<=187 |
| AISI 321 |
>=205 |
>=520 |
>=40 |
<=90 |
<=200 |
<=187 |
| AISI 409L |
>=175 |
>=360 |
>=25 |
<=80 |
<=175 |
<=162 |
| AISI 430 |
>=205 |
>=450 |
>=22 |
<=88 |
<=200 |
<=183 |
| AISI 439 |
>=245 |
>=410 |
>=20 |
<=96 |
<=230 |
<=217 |
| AISI 441 |
>=302 |
>=495 |
>=35 |
<=96 |
<=170 |
<=217 |
| AISI 444 |
>=245 |
>=410 |
>=20 |
<=96 |
<=230 |
<=217 |
Packaging & Shipping
| PackagingDetails: |
Products are well packed and clear labeled according to the regulations and customer's requests. |
| Delivery Detail: |
7-15days after receiving deposit |
Finishings of Stainless Steel Sheets
| No.03 |
Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.
|
Kitchen utensils,Building, construction
|
| No.04 |
Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.
|
Kitchen utensils, Building construction,
Medical equipment.
|
| HL |
Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
|
Building Construction.
|
| Mirror No.08 |
Shinning like a mirror
|
Builiding Construction |
Stainless steel sheet surface finish characteristics
| 2B |
The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. |
| No.1 |
Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc |
| No.4 |
Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL |
Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
| BA |
Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
| 8K |
The product have excellent brightness and prefer reflexivity can to be the mirror. |
Stainless steel Sheets Maintenance:
(1) Regular cleaning and maintenance
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil
(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can you provide a sample for our testing before confirm the order?
A: Yes. We can provide sample to you for approval before you place an order to us. Free sample is available if we have stock.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up.
Name: Denny Cheng
Direct line: 021-67897611
Tel: +86 18605565290
Address: 518,XINZHUAN ROAD, SONGJIANG DISTRICT, SHANGHAI, CHINA 201612
Web: shanghaibozhong.en.made-in-china.com
shanghaibozhong.en.made-in-china.com shanghaibozhong.en.made-in-china.com
){kind=link}