Welded E(R)NiCrMo-10 Alloy Wire
Specifications
AWS A5.14
ASME SFA A5.14
Typical Wire Chemistry
| C |
Mo |
W |
Cr |
Ni |
Fe |
| 0.008 |
13.5 |
3.0 |
21.5 |
Balance |
3.1 |
Typical Mechanical Properties
| Heat Treatment |
Yield
Strength |
Tensile Strength |
Elongation |
Impact Energy |
Hardness |
| As Welded |
82,000 psi |
115,000 psi |
38% |
- |
- |
Applications
ERNiCrMo-10 is used for welding nickel-chromium-molybdenum base materials to themselves, steel and other nickel base alloys, and for cladding steels. Can be used to weld duplex, super duplex stainless steels.
Various Mode of Transportation for You :
1. Air transportation
2. Sea transportation
3. By express mail: DHL, FedEx, EMS, UPS
Standard Export Wooden Case, inner packaging: plastic or foam paper packaged with supporting thing inside or as you request
Stock
| Form |
Specification |
Supply Form |
Others |
| Sheet |
Thickness:0.40-4.75mm,General Width:1000,1219,1500mm |
Whole Coil or piece of it |
Cold Annealed,Surface 2B,2E |
| Plate |
Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) |
Whole Coil or piece of it |
Single hot rolling,Solid solution annealed state,Surface 1D |
| Belt |
Thickness:0.10-3.0mm,Width:50-500mm |
Whole Coil or Specified size |
Cold Annealed,Surface 2B,2E |
| Bar & Rod |
Rolled barΦ5-45mm,Length≤1500mm |
Polished Bar(circle,Square) |
Solution annealing,descaling |
| Forged barΦ26-245mm,Length≤4000mm |
| Weld tube |
Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm |
Base on your requirement |
Use for PHE |
| Seamless Tube |
Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm |
Base on your requirement |
Use for PHE |
| Wire |
Outer diameterΦ0.1-13mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
| Forged piece |
roundness and square alloy |
Base on your requirement |
Steel, Alloy |
| Flangs |
All kinds of Flangs |
Base on your requirement |
Steel, Alloy |
| Welding Material |
Coil wire Φ0.90mm/1.2mm/1.6mm |
Base on your requirement |
Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
| Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm |
| Welding rodΦ2.4mm/3.2mm/4.0mm |
| Tube |
Elbow, three links, four links, different diameter size |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
| Explosive bonded laminate |
Contact us
Name: Denny Cheng
Direct line: 021-67897611
Tel:+86 18605565290
Audited Supplier 
){kind=link}
){kind=link}