Customized 2207 Stainless Steel Elbow

• Customization: Available
• Connection: Welding
• Shape: Reducing
• Model NO.: 2205 2507
• Angle: 90 Degree
• Material: Stainless Steel
• Technics: Forged
• Color: Silver
• Type: Seamless
• Technique: Cold Rolled
• Surface Treatment: Polished
• Usage: Construction & Decoration,
• Section Shape: Round
• Round: Round
• Transport Package: Fumigated Wooden Box
• Specification: diameter 10 to 200mm
• Trademark: Bao Steel
• Origin: China
• HS Code: 7304419000
• Production Capacity: 5000mt/Mt

Product Description

Introduction

Stainless steel Super Duplex 2507 is designed to handle highly corrosive conditions and situations were high strength is required. High molybdenum, chromium and nitrogen content in Super Duplex 2507 help the material withstand pitting and crevice corrosion. The material is also resistant to chloride stress corrosion cracking, to erosion corrosion, to corrosion fatigue, to general corrosion in acids. This alloy has good weldability and very high mechanical strength.

The following sections will discuss in detail about stainless steel grade Super Duplex 2507.

Chemical Composition

The chemical composition of stainless steel grade Super Duplex 2507 is outlined in the following table.

Element	Content (%)
Chromium, Cr	24 - 26
Nickel, Ni	6 - 8
Molybdenum, Mo	3 - 5
Manganese, Mn	1.20 max
Silicon, Si	0.80 max
Copper, Cu	0.50 max
Nitrogen, N	0.24 - 0.32
Phosphorous, P	0.035 max
Carbon, C	0.030 max
Sulfur, S	0.020 max
Iron, Fe	Balance

Physical Properties

The physical properties of stainless steel grade Super Duplex 2507 are tabulated below.

Properties	Metric	Imperial
Density	7.8 g/cm^3	0.281 lb/in^3
Melting point	1350°C	2460°F

Applications

Super Duplex 2507 is widely used in the following sectors:

• Power
• Marine
• Chemical
• Pulp and paper
• Petrochemical
• Water desalinization
• Oil and gas production

Products made using Super Duplex 2507 include:

• Fans
• Wire
• Fittings
• Cargo tanks
• Water heaters
• Storage vessels
• Hydraulic piping
• Heat exchangers
• Hot water tanks
• Spiral wound gaskets
• Lifting and pulley equipment
• Propellers, rotors, and shafts

 

Stock

Form	Specification	Supply Form	Others
Sheet	Thickness:0.40-4.75mm,General Width:1000,1219,1500mm	Whole Coil or piece of it	Cold Annealed,Surface 2B,2E
Plate	Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled)	Whole Coil or piece of it	Single hot rolling,Solid solution annealed state,Surface 1D
Belt	Thickness:0.10-3.0mm,Width:50-500mm	Whole Coil or Specified size	Cold Annealed,Surface 2B,2E
Bar & Rod	Rolled barΦ5-45mm,Length≤1500mm	Polished Bar(circle,Square)	Solution annealing,descaling
	Forged barΦ26-245mm,Length≤4000mm
Weld tube	Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm	Base on your requirement	Use for PHE
Seamless Tube	Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm	Base on your requirement	Use for PHE
Wire	Outer diameterΦ0.1-13mm	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy
Forged piece	roundness and square alloy	Base on your requirement	Steel, Alloy
Flangs	All kinds of Flangs	Base on your requirement	Steel, Alloy
Welding Material	Coil wire Φ0.90mm/1.2mm/1.6mm	Base on your requirement	Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.
	Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm
	Welding rodΦ2.4mm/3.2mm/4.0mm
Tube	Elbow, three links, four links, different diameter size	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy
Explosive bonded laminate	Raw Sheet Thickness≥2mm	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy