4cr13h High Hardness Tool Steel Plate Which Has Strong Nitric Acid and Organic Acid Corrosion, Often Used in High Hardness and High Wear Resistance Parts.

• Customization: Available
• Type: Steel Plate
• Standard: ASTM, AISI, GB, JIS, DIN, BS
• Model NO.: 4Cr13H
• Certification: ISO, RoHS, AISI, ASTM, GB, En, DIN, JIS
• Surface Treatment: Blackface
• Technique: Hot Rolled
• Application: Mold & Dies, Mold & Dies, Plastic Mould Steel
• Special Use: High-strength Steel Plate, Wear Resistant Steel
• Stock: Stock
• Production Process: Ef/Eaf+Lf+Vd/ESR
• Thickness: 16mm-90mm
• Heat Treatment: Q/T
• Transport Package: Export Standard Packing or Customers′ Demand
• Specification: 20-500mm, or According to customer requirements
• Trademark: BOZHONG
• Origin: China
• Production Capacity: 5000tons/Month

Product Description

 4Cr13H High Hardness Tool Steel Plate which has strong nitric acid and organic acid corrosion, often used in high hardness and high wear resistance parts.

Description
4Cr13H High Hardness Tool Steel Plate which has strong nitric acid and organic acid corrosion, often used in high hardness and high wear resistance parts.
 
Feature scope of application
4Cr13H characteristics After quenching, the hardness is higher than 3Cr13, corrosion resistance is good. Use for blade, spray, seat, etc. 4Cr13H properties have strong resistance to nitric acid and organic acid corrosion. Use as a heat pump with high hardness and high wear resistance, valve sheets, valve bearings, medical equipment, plastic molds, plastic mirror molds, springs and other parts.
Chemical Composition (%)

Annealing
General annealing use 780-800 degrees, insulation 4-6 hours, to 50 degrees / hour, cooling to 550 degrees out of air cold, such as tempering using 700-800 degrees insulation 2-4 sales, and then 670-720 degrees insulation, maintain 2-4 hours, to 50 degrees / hour cold cooling to 500 degrees air, off-fire to 17-17hb
 Carbon C: 0.36 to 0.48 Silicon Si: .60

Manganese Mn: .80

Sulphur S: .030

Phosphorus P: .035

Chrome Cr:12.00 to 14.00

Nickel Ni: Allowed to contain .60

Mechanics
Mechanics:

Hardness: Anne, s201HB, indentation diameter 3.9 to 4.3mm;

Heat treatment specifications and gold phase tissue:

Heat treatment specification: 1) annealing, 800 to 900 degrees C slow cold or about 750 degrees C fast cold; 2) quenching, 1050 to 1100 degrees C oil cooling

3) Tempering, 200 to 300 degrees C fast and cold.

Jinxiang organization: The organizational characteristics are Ma's size.
Dimensions

Thickness (mm)	Width (mm)	Length (mm)
20-160	2000-2300	3000-5800
47 sets of Vertical Band Saw Strong cutting capacity!!! Monthly 250tons per set We guarantee a prompt delivery time We cut and machine the steel plate as your required sizes P20+Ni is recommended for the Blocks thickness over 450mm

 
Delivery Condition
EAF+LF+VD+ESR, Hot Rolled, Unmachined or Machined surface, Q+T, Hardness 38-42HRC, UT 100% Passed
 
Characteristics
Low alloyed Presipitation hardening steel, with good comprehensive mechanical properties, high hardenability, convenient heat treatment, small deformation after heat treatment, good polishability. This material also has good nitriding, electrical machining, welding, and pattern marking performation.
 
Applications
Making high polishing plastic moulds, or moulds of household applicance which requires high surface condition.
 
Forging Technique

Heat Temperature	Start Forging Temperature	Finish Forging Temperature	Cooling Method
1120-1160°C	1080-1120°C	>=850°C	Air Cooling

 

Tool steel is the steel used to make cutting tools, measuring tools, molds and wear-resistant tools. Tool steel has high hardness and can maintain high hardness and red hardness at high temperature, as well as high wear resistance and appropriate toughness. Tool steel is generally divided into carbon tool steel, alloy tool steel and high-speed tool steel.Tool steel has good wear resistance, that is, the ability to resist wear. The tool can keep its shape and size unchanged under the conditions of considerable pressure and friction.
Process parameters
High-speed tool steel is also an alloy tool steel, which contains C, Mn, Si, Cr, V, W, Mo, Co. And it can be used to make high-speed rotary cutting tools, wear-resistant, high temperature resistant, which is Cr, The ratio of V, W and Mo is relatively large. Take W12Cr4V5Co5 as an example, Cr-> 3.75% -5%, V-> 4.5% -5.25%, W-> 11.75% -13%. The ratio of Cr and V should not be low Less than 3%. The content of P and S shall not exceed 0.030%.

The processing method of alloy tool steel is mainly pressure processing steel and cutting tool steel. There are many types of alloy tool steel, including cold work, hot work, non-magnetic, plastic mold steel, etc. At the same time, the ratio of Cr and V must not be too low. Selection of tool steel for cold work die

The choice of tool steel for cold work molds is based on the main failure mechanism of the mold in practical use. It is not enough to choose tool steel to have only knowledge of steel properties. It must also consider factors such as the number of parts produced, the type of material being processed, thickness, and hardness. A basic method of selecting tool steel is to first eliminate all the failure mechanisms except for wear, and then select the tool steel with the most suitable wear resistance to meet the production requirements.





What we can offer?
 
We offer a wide range of steel products in a wide variety of dimensions and executions, acc.to the common international specifications or customerized.
Machining and heat treatment are available.
Also, we advise you in choosing the right materials.
 
Shape Available
Solid round bar
Flat bar
Square bar
Hexagon bar
Block
Plate
Sheet
Wire rod
Strip

 

	AISI	DIN	JIS	Stock	Application
Hot Work Tool Steel	H11	1.2343	SKD6	√	Die Casting Dies,Extrusion Dies, Hammer Dies, Ram Dies, Forging Dies etc.
	H13	1.2344	SKD61	√
	H10	1.2365	SKD7
	--	1.2367	--
	L6	1.2714 / 1.2713	SKT4	√
	H12	1.2606	SKD62
	H21	1.2581	SKD5	√
Cold Work Tool Steel	D3	1.2080	SKD1	√	Cutting Tools, Punching Tools, Shear Bladers, Reamers, Thread Rolling Dies, Calipers, Sockets etc.
	--	1.2601	~SKD11	√
	D2	1.2379	~SKD11	√
	--	1.2379 MOD	DC53 (Daido)	√
	D6	1.2436	--
	O1	1.2510	SKS3	√
	O2	1.2842	--
	A2	1.2363	SKD12
	S1	1.2550	--
	S7	1.2357	--
	--	1.2767	SKT6
	L2	1.2210	--
Plastic Mould Steel	P20	1.2311	--	√	Mold Base,           Core & Cavity,         Bumper Mold             etc.
	P20+Ni	1.2738	--	√
	P20+S	1.2312	--	√
	--	1.2316	--
	420	1.2083	SUS420J2	√
	--	--	NAK80 (Daido)	√
Alloy Steel	4120	25CrMo4 / 1.7218	SCM420		Shafts, Gears, Drillers, Chains, Bolts, Nuts, Pins, Suds, Keys, Bites, Crankshafts, Connecting Rods, Came, Couplings  etc.
	4135	34CrMo4 / 1.7220	SCM435
	4130	34CrMo4 / 1.7220	SCM430	√
	4140	42CrMo4 /        42CrMoS4 /                1.7225	SCM440	√
	4142	41CrMo4 / 1.7223	SCM440
	4145H	--	--
	4330V	--	--
	4340	34CrNiMo6 / 1.6582	SNCM439
	5115	16MnCr5 / 16MnCrS5 / 1.7131
	5120	20MnCr5 / 20MnCrS5 / 1.7147	SMnC420H
	5140	41Cr4 / 41CrS4 / 1.7035	SCr440	√
	8620	21NiCrMo2 / 1.6523	SNCM220
	8640	40NiCrMo2-2 / 1.6546	SNCM240
	--	18CrNiMo7-6 / 17CrNiMo6 / 1.6587	--
	9840	36CrNiMo4 / 1.6511	--
	E71400	41CrAlMo7-10 / 1.8509	SACM1
	--	34CrAlNi7 / 1.8550	--
Bearing Steel	E52100	100Cr6 / 1.3505	SUJ2	√	Bearing, Shafts etc.
	--	100CrMn6 / 1.3520	--
	--	100CrMo7-3 / 1.3536	--
Spring Steel	5155	55Cr3 / 1.7176	SUP9		Springs
	6150	51CrV4 / 1.8159	SUP10
	9261	60CrSi7 / 1.7108	--
Carbon Steel	1010	CK10 / C10E / 1.1121	S10C		Shafts, Chains, Bolts, Nuts, Pins, Suds, Keys, Bites, Came, Couplings  etc.
	1020	C22 / 1.0402	S20C	√
	1040	CK40 / C40E / 1.1186	S40C	√
	1045	CK45 / C45E / 1.1191	S45C	√
	1050	CK50 / C50E / 1.1206	S50C	√
	1055	CK55 / C55E / 1.1203	S55C
	1064	CK60 / C60E / 1.1221	S58C
High Speed Tool Steel	M2	1.3343	SKH51	√	Reamer,       End-mill,          Hob, Cutter, Bite, Drill, Punch, Tap, Brooch etc.
	M7	1.3348	--
	M42	1.3247	SKH59	√
	M35	1.3243	SKH55	√
	T1	1.3355	SKH2
	T15	1.3202	--
	T42	1.3207	SKH57

 
Note:
1). √ means we have stoc
2). Delivery Condition:
Smelting: EAF+LF+VD (+ESR)
Making: Hot rolled, Cold rolled, Forged, Cold Drawn
Heat Treatment: Untreated, Annealing, N+T, Q+T
Surface: Black, Peeled, Turned, Milled, Grinded, Polished
 
Packing & Shipping
Hot keywords:high quality

Our company