Designation by Standards
|Brand Name||Ravne No.||Mat. No.||DIN||EN||AISI|
Chemical Composition (in weight %)
|0.91||max. 0.45||max. 0.40||4.15||-||1.90||6.30||-||Co: 4.75|
M35 is molybdenum high speed steel. Very high resistance to wear and to softening at elevated temperatures. High resistance of cutting edge and good toughness. Deep hardening response. High hot hardness.
Highly stressed drills, milling cutters, profile cutting tools, thread cutting drills and cold forming tools.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 217
Density [g/cm3]: 8.1
Thermal conductivity [W/m.K]: 19.0
Electric resistivity [Ohm mm2/m]: 0.60
Specific heat capacity[J/g.K]: 0.46
Coefficient of Linear Thermal Expansion 10-6 oC-1
Heat to 820-880oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 230-300.
Stress relieving to remove machining stresses should be carried out by heating to 650oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Heat to 450-600oC, preheat to 850oC and then to 1050oC. Harden from a temperature of 1210-1250oC followed by oil, air quenching or warm bath 550oC. Hardness after quenching is 64-66 HRC.
Transformation temperatures: Ac1=824oC , Ac3=853oC.
Tempering temperature: 3 x 1 hour at 540-570oC.
Tempering Temperature (oC) vs. Hardness (HRC)