| Customization: | Available |
|---|---|
| Type: | Stainless Steel Pipes |
| Standard: | ASTM, AISI, DIN, EN |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Introduction: INCOLOY alloys are super alloys that have nickel as the base metal. These alloys have nickel-chromium-iron as the primary constituents. By varying the other elements, these alloys can be designed to resist attack from specific chemical reagents. These alloys exhibit high strength even at high temperatures. INCOLOY alloy 25-6HN is also known as super-austenitic stainless steel. This alloy contains a higher content of molybdenum and nitrogen. These additions enhance the thermal stability and corrosion resistance of the alloy. Among super austenitic stainless steels, INCOLOY alloy 25-6HN offers higher degree of corrosion resistance and strength. This datasheet will look into the chemical composition, properties and applications of INCOLOY 25-6HN. Chemical Composition The chemical composition of INCOLOY alloy 25-6HN is given in the following table.ElementContent (%)
The following table discusses the physical properties of INCOLOY alloy 25-6HN.PropertiesMetricImperial
The mechanical properties of INCOLOY alloy 25-6HN are tabulated below.PropertiesMetricImperial
Some of the designations used to denote INCOLOY alloy 25-6HN are listed below:
Machinability Machining of INCOLOY alloy 25-6HN should be done at a slightly lower speed when compared to 316 stainless steel, as it has a high strength. Welding INCOLOY alloy 25-6HN can be welded by shielded metal arc welding, gas tungsten arc welding, submerged arc welding, plasma arc welding and gas metal arc welding. The filler metal and electrodes are usually made of INCONEL alloy. Hot working INCOLOY alloy 25-6HN can be hot worked at temperature ranges of 982-1232°C (1800-2250°F). Annealing INCOLOY alloy 25-6HN should be annealed at temperatures greater than 1121°C (2050°F). Applications The INCOLOY alloy 25-6HN is used in the following applications: Welded tubes for chemical processing plants Tubes for heat exchangers Marine applications In desalination and flue gas desulfurization equipment Reaction vessels for pharmaceutical vessels. |
| Form | Specification | Supply Form | Others |
| Sheet | Thickness:0.40-4.75mm,General Width:1000,1219,1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B,2E |
| Plate | Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
| Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B,2E |
| Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle,Square) | Solution annealing,descaling |
| Forged barΦ26-245mm,Length≤4000mm | |||
| Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | Use for PHE |
| Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | Use for PHE |
| Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
| Forged piece | roundness and square alloy | Base on your requirement | Steel, Alloy |
| Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
| Welding Material | Coil wire Φ0.90mm/1.2mm/1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
| Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm | |||
| Welding rodΦ2.4mm/3.2mm/4.0mm | |||
| Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
| Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
){kind=link}