Customization: | Available |
---|---|
Sample: | Corrosion Resistance Super Alloy Inconel C-276 |
Custom Sample: | 5-7 Days |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Inconel is a group of austenitic nickel-chromium-based super alloys produced by Special Metals Corporation. Super alloys are referred to as high performance alloys that function well in environments with elevated temperatures.
Super alloy INCONEL C-276 has high molybdenum content which provides the material with localized corrosion resistance like pitting. This alloy is generally known for corrosion resistance in a wide range of aggressive media. The low carbon content in this alloy helps to reduce carbide precipitation while performing welding.
The following section explains in detail about super alloy INCONEL C-276.
The chemical composition of INCONEL C-276 is outlined in the following table.
Element | Content (%) |
---|---|
Molybdenum, Mo | 15-17 |
Chromium, Cr | 14.5-16.5 |
Cobalt, Co | 2.5 max |
Manganese, Mn | 1 |
Vanadium, V | 0.35 max |
Silicon, Si | 0.08 max |
Phosphorus, P | 0.04 max |
Sulfur, S | 0.03 max |
Carbon, C | 0.01 max |
Nickel. Ni | 62.5-67.5 |
The physical properties of INCONEL C-276 are tabulated below.
Properties | Metric | Imperial |
---|---|---|
Density | 8.89 g/cm3 | 0.321 lb/in3 |
Melting point | 1325 °C | 2417 °F |
The following table shows mechanical properties of INCONEL C-276.
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 740.5 MPa | 107400 psi |
Yield strength | 347 MPa | 50300 psi |
Elastic modulus | 205 GPa | 29700 ksi |
Elongation at break | 67% | 67% |
The thermal properties of INCONEL C-276 are tabulated below.
Properties | Metric | Imperial |
---|---|---|
Thermal conductivity (@23°C/73.4°F) | 9.80 W/m-K | 68.0 BTU in/hr.ft².°F |
Weldability of INCONEL alloy C-276 is rated as good. This material can be used as-welded for most applications.
Hot working of this alloy can be performed 870 and 1230°C (1600 and 2250°F). in case of performing heavy working, it has to be above 1090°C (2000°F).
INCONEL alloy C-276 can be annealed at 1150-1175°C (2100-2150°F) and rapidly cooled by water quenching.
INCONEL C-276 is chiefly used in the following areas:
Products made using INCONEL C-276 are as follows:
Stock
Form |
Specification |
Supply Form |
Others |
Sheet |
Thickness:0.40-4.75mm,General Width:1000,1219,1500mm |
Whole Coil or piece of it |
Cold Annealed,Surface 2B,2E |
Plate |
Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) |
Whole Coil or piece of it |
Single hot rolling,Solid solution annealed state,Surface 1D |
Belt |
Thickness:0.10-3.0mm,Width:50-500mm |
Whole Coil or Specified size |
Cold Annealed,Surface 2B,2E |
Bar & Rod |
Rolled barΦ5-45mm,Length≤1500mm |
Polished Bar(circle,Square) |
Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm |
|||
Weld tube |
Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm |
Base on your requirement |
Use for PHE |
Seamless Tube |
Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm |
Base on your requirement |
Use for PHE |
Wire |
Outer diameterΦ0.1-13mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
Forged piece |
roundness and square alloy |
Base on your requirement |
Steel, Alloy |
Flangs |
All kinds of Flangs |
Base on your requirement |
Steel, Alloy |
Welding Material |
Coil wire Φ0.90mm/1.2mm/1.6mm |
Base on your requirement |
Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm |
|||
Welding rodΦ2.4mm/3.2mm/4.0mm |
|||
Tube |
Elbow, three links, four links, different diameter size |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate |
Raw Sheet Thickness≥2mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611