Inconel 625 Nickel Alloy Seamless Pipe

Product Details
Customization: Available
Type: Round
Standard: AISI, ASTM, DIN, JIS, GB
Manufacturer/Factory, Trading Company, Group Corporation

360° Virtual Tour

Diamond Member Since 2016

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

to see all verified strength labels (10)
  • Inconel 625 Nickel Alloy Seamless Pipe
  • Inconel 625 Nickel Alloy Seamless Pipe
  • Inconel 625 Nickel Alloy Seamless Pipe
  • Inconel 625 Nickel Alloy Seamless Pipe
  • Inconel 625 Nickel Alloy Seamless Pipe
  • Inconel 625 Nickel Alloy Seamless Pipe
Find Similar Products

Basic Info.

Model NO.
Inconel 625
Composition
Stainless Steel Scrap
Technique
Cold Rolled
Shape
Round
Surface Treatment
Coated
Special Use
Wear Resistant Steel
Application
Boiler Plate
Transport Package
Plastic Wraping
Specification
DN10~450
Trademark
without
Origin
China
HS Code
76210000
Production Capacity
30000PCS/Month

Product Description


Specifications
100% PMI;100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test
Description & Name:  Inconel 625 pipe  UNS N06625 nickel alloy seamless tube ASME SB444 
Standard:   ASTM/ASME B/SB 444
Material: Inconel 600,625,617,690,693, Monel 400, Monel K500,Incoloy800/800H/800HT,825, Alloy20,Alloy28. Hastelloy C276,AL6XN,N08028 etc.
 
UNS N06625 Chemical Composition%          
Alloy Designation Element C Ni Cr Mn Fe Si Mo Al Ti Co+Ta P S
Inconel 625 Min. % - 58 20 - - - 8 - - 3.15 - -
Max. % 0.1 - 23 0.5 5 0.5 10 0.4 0.4 4.15 0.015 0.015
 
 
Mechanical Propeties Inconel625
Density: 8.4g/cm3
Melting Point:  1290-1350°c
Tensile Strength Min.(Mpa): 690
Yield Strength Min. (MPa): 0.2% offset 276
Elongation A 5%(min.):  30
HB Max.: 220
 
Inconel 625 Nickel Alloy Seamless Pipe

Nominal Dia: 1/2 "to 10" NB for seamless pipe
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS 
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10 
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:
30 m(Max) or as your requirement
Process: 
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube

Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end 

Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
 
Inspection and Test Procedure
1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material
2.100% Dimension & Visual Examination 
3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test
4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test  (ET or UT) 
5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)
6.Straightness Test  (optional)
7.Roughness Test (optional)
8.Intergranular Corrosion Test(optional)
9.Impact Test (optional)
10.Grain Size Determinations (optional)
NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION.
 
>>Seamless Pipe Production Facilities
 
>>Production Process
 
>>Laboratory Instrument  & Test Equipment

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier