Customization: | Available |
---|---|
Type: | N02201/Ni201 Nickel 201 Alloy |
Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Nickel 201 alloy is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures.
It is resistant to acids and alkalis, and dry gases at room temperature. It is also resistant to mineral acids depending on the temperature and concentration of the solution.
The following section will discuss in detail about nickel 201 alloy.
The chemical composition nickel 201 alloy is outlined in the following table.
Element | Content (%) |
---|---|
Nickel, Ni | ≥ 99 |
Iron, Fe | ≤ 0.4 |
Manganese, Mn | ≤ 0.35 |
Silicon, Si | ≤ 0.35 |
Copper, Cu | ≤ 0.25 |
Carbon, C | ≤ 0.020 |
Sulfur, S | ≤ 0.010 |
The following table shows the physical properties of nickel 201 alloy.
Properties | Metric | Imperial |
---|---|---|
Density | 8.89 g/cm3 | 0.321 lb/in3 |
Melting point | 1435 - 1446°C | 2615 - 2635°F |
The mechanical properties of nickel 201 alloy are displayed in the following table.
Properties | Metric | Imperial |
---|---|---|
Tensile strength (annealed) | 403 MPa | 58500 psi |
Yield strength (annealed) | 103 MPa | 14900 psi |
Elongation at break (annealed prior to test) | 50% | 50% |
The thermal properties of nickel 201 alloy are given in the following table
Properties | Metric | Imperial |
---|---|---|
Thermal expansion co-efficient (@20-100°C/68-212°F) | 13.1 µm/m°C | 7.28 µin/in°F |
Thermal conductivity | 79.3 W/mK | 550 BTU.in/hrft².°F |
Other designations that are equivalent to nickel 201 alloy include the following:
The following are the list of applications of nickel 201 alloy:
Stock
Form |
Specification |
Supply Form |
Others |
Sheet |
Thickness:0.40-4.75mm,General Width:1000,1219,1500mm |
Whole Coil or piece of it |
Cold Annealed,Surface 2B,2E |
Plate |
Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) |
Whole Coil or piece of it |
Single hot rolling,Solid solution annealed state,Surface 1D |
Belt |
Thickness:0.10-3.0mm,Width:50-500mm |
Whole Coil or Specified size |
Cold Annealed,Surface 2B,2E |
Bar & Rod |
Rolled barΦ5-45mm,Length≤1500mm |
Polished Bar(circle,Square) |
Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm |
|||
Weld tube |
Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm |
Base on your requirement |
Use for PHE |
Seamless Tube |
Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm |
Base on your requirement |
Use for PHE |
Wire |
Outer diameterΦ0.1-13mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
Forged piece |
roundness and square alloy |
Base on your requirement |
Steel, Alloy |
Flangs |
All kinds of Flangs |
Base on your requirement |
Steel, Alloy |
Welding Material |
Coil wire Φ0.90mm/1.2mm/1.6mm |
Base on your requirement |
Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm |
|||
Welding rodΦ2.4mm/3.2mm/4.0mm |
|||
Tube |
Elbow, three links, four links, different diameter size |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate |
Raw Sheet Thickness≥2mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611