Inconel 625 Nickel Alloy Pipe

• Customization: Available
• Standard: JIS, GB, DIN, ASTM, AISI
• Purity: >99.99%
• Model NO.: Inconel 625
• Alloy: Alloy
• Type: Nickel Pipe
• Powder: Not Powder
• Sample: Inconel 625 Nickel Alloy Pipe
• Custom Sample: 5-7 Days
• Certificate: ISO
• Shipping Port: Shanghai
• MOQ: 500kg
• Transport Package: Good Quality & Fumigated Wooden Box
• Specification: Dia 16 25 30 40mm * 6000mm length
• Trademark: Tisco/Baosteel
• Origin: China
• HS Code: 7222300000
• Production Capacity: 600 Metric Ton /Month

Product Description

Inconel 625 Nickel Alloy Pipe

Introduction

Inconel 625 is a Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being especially resistant to pitting and crevice corrosion. It is a favourable choice for sea water applications.

Chemical Composition of Inconel 625

The compositional range for Inconel 625 is provided in the table below.

Element	Content
Ni	58% min
Cr	20 - 23%
Mo	8 - 10%
Nb+Ta	3.15 - 4.15%
Fe	5% max

Typical Properties of Inconel 625

Typical properties of Inconel 625 are covered in the following table.

Property	Metric	Imperial
Density	8.44 g/cm^3	0.305 lb/in^3
Melting point	1350 °C	2460 °F
Co-Efficient of Expansion	12.8 μm/m.°C (20-100°C)	7.1x10^-6 in/in.°F (70-212°F)
Modulus of rigidity	79 kN/mm^2	11458 ksi
Modulus of elasticity	205.8 kN/mm^2	29849 ksi

Properties of Supplied Materials and Heat Treated Materials

Condition of Supply	Heat Treatment (After Forming)
Annealed/Spring Temper	Stress relieve at 260 - 370°C (500 - 700°F) for 30 - 60 minutes and air cool.
Condition	Approx Tensile Strength		Approx Service Temp.
Annealed	800 - 1000 N/mm^2	116 - 145 ksi	-200 to +340°C	-330 to +645°F
Spring Temper	1300 - 1600 N/mm^2	189 - 232 ksi	up to +200°C	up to +395°F

Relevant Standards

Inconel 625 is covered by the following standards:

•         BS 3076 NA 21

•         ASTM B446

•         AMS 5666

Equivalent Materials

Inconel 625 is the tradename of Special Metals Group of Companies and equivalent to:

•         W.NR 2.4856

•         UNS N06625

•         AWS 012

Applications of Inconel 625

Inconel 625 typically finds application in:

•         Marine

•         Aerospace industries

•         Chemical processing

   

•         Pollution control equipment

Stock

Form	Specification	Supply Form	Others
Sheet	Thickness:0.40-4.75mm,General Width:1000,1219,1500mm	Whole Coil or piece of it	Cold Annealed,Surface 2B,2E
Plate	Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled)	Whole Coil or piece of it	Single hot rolling,Solid solution annealed state,Surface 1D
Belt	Thickness:0.10-3.0mm,Width:50-500mm	Whole Coil or Specified size	Cold Annealed,Surface 2B,2E
Bar & Rod	Rolled barΦ5-45mm,Length≤1500mm	Polished Bar(circle,Square)	Solution annealing,descaling
	Forged barΦ26-245mm,Length≤4000mm
Weld tube	Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm	Base on your requirement	Use for PHE
Seamless Tube	Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm	Base on your requirement	Use for PHE
Wire	Outer diameterΦ0.1-13mm	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy
Forged piece	roundness and square alloy	Base on your requirement	Steel, Alloy
Flangs	All kinds of Flangs	Base on your requirement	Steel, Alloy
Welding Material	Coil wire Φ0.90mm/1.2mm/1.6mm	Base on your requirement	Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.
	Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm
	Welding rodΦ2.4mm/3.2mm/4.0mm
Tube	Elbow, three links, four links, different diameter size	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy
Explosive bonded laminate	Raw Sheet Thickness≥2mm	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy

4. Contact us

Name: Denny Cheng

Direct line: 021-67897611