Excellent Quality 1.4550/S34778/Heat-Resistant Stainless steel plate
1.Product Description
Stainless steel is a steel alloy with a minimum of 10.5% chromium content, as well as certain Ni, Mo, Mn, Cu, N contents etc.
Stainless steel does not readily corrode, rust or stain with water. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion and blocks corrosion from spreading into the metal.
Plate thickness 0.2mm~100mm
Standard plate zise 1000*2000mm,1219*2440mm,1500*6000mm,1800*6000mm,2000*6000mm
Coil thickness 0.3mm~3mm
Coil width 1m, 1.22m, 1.5m, 1.8m, 2m, 2.6m
Length 2000mm, 2440mm(8feet), 2500mm, 3000mm, 3048mm(10feet), 5800mm, 6000mm,as customer's requirements
Materials 303se,304,TP304,TP304L,305,306,309S,310S,310H, TP316,TP316L,316Ti,317,317L,317Ti,321,SUS321,347,SUS347,440C,440F,C-276,Ni80Cr20,Ti,630,631,632,XM7,329JI,2205,2207,S32750,S32550,S32154,S32183, 904L,ect.
Minimum order 1 Ton
Standards ASTM A511 A269 A312 A213, GB/ T14976-2002 GB 13296-91
FOB price the latest price
Surface polish, primary colour,matt,mirror face ,wire drawing
Certification ISO,SGS
Application chemical industry, metallurgy, construction, water conservancy
Production requirement cold drawing, cold rolling, precision rolling
Physical and chemical properties:
High oxidation resistance in air at ambient temperature;
Highly resistant to attack from acids, bases, organics;
High resistance to stress corrosion cracking;
High resistance to general corrosion, pitting corrosion, crevice corrosion, erosion corrosion and corrosion fatigue;
High mechanical strength.
Stainless steel plate maintenance:
(1) Regular cleaning and maintenance
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil
(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
Finishings of Ba En 1.4565 S34565 Stainless Steel Plates
| No.03 |
Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.
|
Kitchen utensils,Building, construction
|
| No.04 |
Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.
|
Kitchen utensils, Building construction,
Medical equipment.
|
| HL |
Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
|
Building Construction.
|
| Mirror No.08 |
Shinning like a mirror
|
Builiding Construction |
characteristics of Ba En 1.4565 S34565 Stainless Steel Plates
| 2B |
The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. |
| No.1 |
Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc |
| No.4 |
Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL |
Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
| BA |
Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
| 8K |
The product have excellent brightness and prefer reflexivity can to be the mirror. |
Maintenance of Ba En 1.4565 S34565 Stainless Steel Plates
(1) Regular cleaning and maintenance
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil
(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can you provide a sample for our testing before confirm the order?
A: Yes. We can provide sample to you for approval before you place an order to us. Free sample is available if we have stock.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up.
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611
Tel: +86 18605565290
Address: 518,XINZHUAN ROAD, SONGJIANG DISTRICT, SHANGHAI, CHINA 201612
Web: shanghaibozhong.en.made-in-china.com
shanghaibozhong.en.made-in-china.com shanghaibozhong.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}