monel400 Full specification supply of sheet, round steel and coil
1.Product Description
Product name
Monel MONEL 400/K-500
General term in China
Monel, MONEL, Nickel-Copper Alloys
National standards
MONEL 400, ASTM B127, ASME SB-127, AMS 4554, JIS NW4400, UNS N04400, EN 2.4360, NCu28-2.5-1.5
MONEL K-500, UNS N05500, EN 2.4375, ASTM B 865
Main components
65Ni-32Cu-1Fe
chemical composition
% Ni-Cu-Fe-C-Mn-Si S
Minimum 6328
Maximum 342.50.3 20.50.024
Mechanical properties
Minimum mechanical properties of alloys at room temperature:
Tensile Strength, Yield Strength, Elongation, Brinell Hardness of Alloys
Rm N/mm2 RP0.2N/mm2 A5% HB
Monel 400 480 170 35 (> 331)
Mechanical properties (high quality bar)
Specification state_/MPa_0.2/MPa_5/%
Bar rolling 760 585 8
Forging rod 585 380 10
Tube annealing 483 8340
Stress removal 586 207 15
Material description
MONEL 400 is a deformable nickel-copper nickel-based alloy. It has good seawater corrosion resistance and chemical corrosion resistance, and strong chloride stress corrosion cracking resistance. The alloy is one of the few alloys that can be used in fluoride. It has good resistance to oxides stress fission corrosion in hydrofluoric acid and fluorine medium, such as seawater and brine.
MONEL 400 also has excellent corrosion resistance in medium concentration alkaline and salt solutions.
In the colder alkaline environment, the alloy is used in weak acids such as sulphur and hydrogen fluoride.
It has good mechanical properties from below zero to 550 C and is easy to weld.
Characteristic
Monel 400 is a kind of corrosion resistant alloy with the greatest amount, the most extensive use and excellent comprehensive properties. The alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, as well as in hot concentrated alkali solution. It also resists corrosion of neutral solution, water, sea water, atmosphere, organic compounds, etc. An important characteristic of the alloy is that it does not produce stress corrosion cracks and has good cutting performance.
structure
The structure of Monel 400 alloy is a single-phase solid solution with high strength.
Corrosion resistance
Process Performance and Requirements
Hot working
The annealing temperature should be controlled between 700 and 900 C. Rapid air cooling is recommended to obtain the best corrosion resistance. Time and temperature will directly affect the final grain size, so annealing parameters must be carefully formulated.
Cold working
Intermediate annealing should be carried out in cold working. High work hardening rate
Deformation of cold forming is more than 5%. It must be removed stress or annealed before it can be used.
welding technology
Argon arc welding, plasma arc welding, gas shielded arc welding or hand arc welding can be used for welding. Pulse arc welding is the first choice. Surface treatment is best after welding.
Scope and field of application
Monel 400 alloy is a multipurpose material which can be used in many industrial fields.
1. Seamless Pipeline and Steam Pipe in Power Plant
2. Seawater exchangers and evaporators
3. Sulfuric acid and hydrochloric acid environment
4. Crude distillation
5. Pump shafts and propellers of marine equipment
6. Equipment for uranium extraction and isotope separation in the nuclear industry
7. Manufacture of pumps and valves for hydrochloric acid production equipment
Typical working condition
Fluorine, hydrofluoric acid, hydrogen fluoride and derivatives
Matching welding consumables
Monel MONEL 400 electrode (ENiCu-7), MONEL 400 wire (ERNiCu-7)
Supply form
Plates, strips, bars, pipes (welded and seamless), wires, forgings, bars, flanges, welding materials
Quality Assurance:
Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET
Company information:
Bozhong Group Mainly supply in forms of coil, sheet, plate, rod, bar, tube, pipe, beam, angle, flange, wire, strip, channel, etc., with various varieties, wide range of dimensions, high purity, stable chemical composition, high dimensional accuracy and excellent surface quality. The products are mainly used in the fields of industries such as automobile engineering, railway transportation, aviation, aerospace, machinery, petrochemical, energy, environmental protection, offshore, chemical, oil & gas, military, power plant, nuclear power, pressure vessel, boiler equipment, mold manufacture, etc.
- steel coil
- steel plate
- steel sheet
- steel bar/rod
steel round bar
steel flat bar
steel square bar
- steel pipe/tube ( welded or seamless )
steel round pipes
steel square pipes
steel welded tubes
steel seamless tubes
- steel strip
- steel beam
- steel angle
- steel channel
- steel flange
- Steel wire
Bozhong Group can supply a variety of structural steel, high-strength steel, wear-resistant steel plate, boiler and pressure vessel steel, marine engineering and stainless steel plate in the thick steel and various European standard bars and pipes and profiles.Our global sales and service network throughout all around the world to ensure that the goods reach the customer in the shortest time.
We can follow your drawings and requirements, to provide you with oxygen cutting, plasma cutting and laser cutting and other processing services. You can also perform ultrasonic testing in accordance with EN10160 standard, EN10164 standard test Z15, Z25, Z35, weld bending detection, PWHT detection,etc.
We have ISO9001: 2000 quality management system certification, and obtain the quality certification from all the well-known certification company, including TuV / LRS / GL / CE and so on.
Special steel includes as below:
Boiler and pressure vessel steel
Pipeline steel
Bridge steel
Nuclear power steel
Structural steel
Die steel
High strength steel
Abrasion resistant steel
Weathering, corrosion resistant and fire resistant steel
High rise building steel
Shipbuilding and offshore engineering steel
3.FAQ
Q: What's your minimum order quantity?
A: Our minimun quantity is 500 Kg. We also can offer you samples.
Q: What's your delivery time?
A: Our normal delivery time is 7-20 days, and it depends on your quantity and items. Of course, if you need products
urgently, we also will consider arranging it firstly.
Q: What's the price of your product?
A: Our prices are based on the material grade, size, quantity and physical performance etc. So if you can offer us the
detailed information, then we can give you the best reasonable price. Also, we can do special size and color for customers.
Q: What's your after-sales service?
A: We have two ways to handle claims by replacement and deduction. Of course, if the materialis not good used by wrong
parameter from customer, we won't be responsible.
Q: Why do you think I will want to buy from you?
A: We have advantages with 22 years of professional experiences in manufacturing & designing, advanced technology & the
first-class equipment, perfect logistics management, high-quality after-sales service and competitive price.
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611
Tel: +86 18605565290
){kind=link}