TI-6246Titanium Alloy Steel Pipe with high strength and low elastic modulus
1)Products:
TI-6246Titanium Alloy Steel Pipe with high strength and low elastic modulus
Titanium alloy tubes are tubes made of titanium alloys. Titanium alloys can be divided into three categories according to organization. (1 Titanium is added with aluminum and tin elements. 2 Titanium is added with aluminum chromium molybdenum vanadium and other alloy elements. 3 Titanium is added with aluminum and vanadium and other elements.) They have high mechanical properties, excellent stamping performance, and can be used for various In various forms of welding, the strength of the welded joint can reach 90% of the strength of the base metal, and the cutting performance is good. Titanium tube has high corrosion resistance to chloride, sulfide and ammonia. Titanium has higher corrosion resistance in seawater than aluminum alloys, stainless steels, and nickel-based alloys. Titanium is also resistant to water impact.
2)Application
Titanium alloy is mainly used to make aircraft engine compressor components, followed by rocket, missile and high-speed aircraft structural parts. In the mid-1960s, titanium and its alloys have been used in general industry, for making electrodes in the electrolysis industry, condensers in power plants, heaters for petroleum refining and seawater desalination, and environmental pollution control devices. Titanium and its alloys have become a corrosion-resistant structural material. It is also used to produce hydrogen storage materials and shape memory alloys.
3)Titanium alloy classification
Fold by organization
(1 Titanium adds aluminum and tin elements. 2 Titanium adds aluminum chromium molybdenum vanadium and other alloy elements. 3 Titanium adds aluminum and vanadium and other elements.) Titanium alloy has high strength and small density, good mechanical properties, toughness and The corrosion resistance is very good. In addition: the titanium alloy has poor process performance and difficult cutting. In hot processing, it is very easy to absorb impurities such as oxyhydrogen, nitrogen, carbon, etc. There is also poor wear resistance, and the production process is complicated.
Fold by mixed elements
An alloy composed of titanium and other elements. The industrial production of titanium began in 1948. The need for the development of the aviation industry has enabled the titanium industry to grow at an average annual growth rate of about 8%. At present, the annual output of titanium alloy processed materials in the world has reached more than 40,000 tons, and there are nearly 30 kinds of titanium alloy grades. The most widely used titanium alloys are Ti-6Al-4V (TC4), Ti-5Al-2.5Sn (TA7) and industrial pure titanium (TA1, TA2 and TA3).
Fold by use
Titanium alloys can be divided into heat-resistant alloys, high-strength alloys, corrosion-resistant alloys (titanium-molybdenum, titanium-palladium alloys, etc.), low-temperature alloys, and special functional alloys (titanium-iron hydrogen storage materials and titanium-nickel memory alloys), etc. . The composition and properties of typical alloys are shown in the table.
5)Grade:
Grade :GR1,GR2,GR7,GR12,GR17,GR18,GR21,GR23,TI-811,TI-6242s,TI-6246,TI-15333,TI-10-2-3,TA9,TA18,TC19,TC20,SP-700and so on.
Titanium alloy are divided into three main groups:alpha-phase,Beta-phase,and alpha-beta-phase.Grade 23 Ti 6AI 4V ELI alloy is an alpha-beta wrought alloy.The ELI stands for extra low interstitial For an alloy to be branded as an ELI product,it should be produced as such at the mill .The specification is from 5.8 to 325mm.It can be widely used in airframe components,cryogenic vessels,heat exchangers.CPI equipment, condenser tubing,picking baskets,exhaust pip shrouds,cases,hubs forgings,biomedical implants.
6)Advantages of titanium alloy
Compared with other metal materials, titanium alloys have the following advantages:
A)The specific strength (tensile strength / density) is higher (see figure), the tensile strength can reach 100 ~ 140kgf / mm2, and the density is only 60% of steel.
B)The medium temperature strength is good, the use temperature is a few hundred degrees higher than that of aluminum alloy, it can still maintain the required strength at medium temperature, and can work for a long time at a temperature of 450 ~ 500 ºC.
C)Good corrosion resistance, a uniform and dense oxide film is immediately formed on the titanium surface in the atmosphere, which has the ability to resist the erosion of various media. Generally, titanium has good corrosion resistance in oxidizing and neutral media, and is more excellent in seawater, wet chlorine and chloride solutions. But in a reducing medium, such as hydrochloric acid, the corrosion resistance of titanium is poor.
D) Titanium alloys with good low temperature performance and extremely low gap elements, such as TA7, can maintain a certain plasticity at -253 ºC.
E)Low elastic modulus, small thermal conductivity, and no ferromagnetism.
F) High hardness.
G)Poor stamping and good thermoplasticity.
Heat treatment Titanium alloy can obtain different phase composition and structure by adjusting the heat treatment process. It is generally believed that fine equiaxed structures have better plasticity, thermal stability and fatigue strength; needle-like structures have higher endurance strength, creep strength and fracture toughness; equiaxed and needle-like mixed structures have better comprehensive properties.
Commonly used heat treatment methods are annealing, solution treatment and aging treatment. Annealing is to eliminate internal stress, improve plasticity and organizational stability to obtain better overall performance. Generally, the annealing temperature of α alloy and (α + β) alloy is chosen to be 120 ~ 200 ºC below the transition point of (α + β)-→ β phase; solid solution and aging treatment are rapid cooling from high temperature area to obtain martensite α ′ Phase and meta-stable β phase, and then incubate in the middle temperature zone to decompose these meta-stable phases to obtain finely dispersed second phase particles such as α phase or compound to achieve the purpose of strengthening the alloy. Normally, the quenching of (α + β) alloy is carried out at 40 ~ 100 ºC below the transition point of (α + β)-→ β phase, and the quenching of metastable β alloy is 40 ~ 80 ºC above the transition point of (α + β)-→ β phase get on. Aging treatment temperature is generally 450 ~ 550 ºC. In addition, in order to meet the special requirements of the workpiece, the industry also adopts double annealing, isothermal annealing, β heat treatment, deformation heat treatment and other metal heat treatment processes.
Our Service For You
Pre-sale Service
1. Sample can be offered with sample charge and courier fee by buyer's side.
2. We have full stock,and can deliver within short time.Many styles for your choices.
3. OEM and ODM order are accepted, Any kind of logo printing or design are available.
4. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you
5. All of our products are produce by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.
6. We have 8 year experience of design, manufacture and sell lingerie, we cherish every order from our honor.
After you choose
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment,
3. Email you the tracking no, and help to chase the parcels until it arrive you.
After-sale choose
1. We are very glad that customer give us some suggestion for price and products.
2. If any question,please contact with us freely by E-mail or Telephone.
FAQ:
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can you provide a sample for our testing before confirm the order?
A: Yes. We can provide sample to you for approval before you place an order to us. Free sample is available if we have stock.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
contact:
Name: Alicia Liu
Derect Line: 021-67897511
Website: https://shanghaibozhong.en.made-in-china.com
){kind=link}