N04400/2.4361/Monel 400 Pipe & Tube
1.Product Description
Alloy 400 / N04400
Nickel Copper Alloy 400 Monel Seamless Pipe
Description
Alloy 400 is a single phase, solid-solution nickel-copper alloy that offers superior resistance to many corrosive environments over temperatures ranging from sub-zero to 800°F. This alloy is only hardenable through cold working, rather than heat treatment. The Curie Temperature of this alloy lies in the ambient temperature range and is affected by variations in the alloy's chemical composition. Caution is advised in applications where strong nonmagnetic characteristics are desired. The ratio of copper to nickel in alloy 400 is almost identical to that found in the ore the metal is derived from. This alloy was first patented over 100 years ago, and it continues to be one of the most commonly used corrosion resistant alloys commercially produced.
Industries and Applications
Alloy 400 has been widely used in a variety of industries, and has been particularly useful in the marine industry and chemical processing industry. Typical applications include pumps and valves, propeller shafts, marine fixtures and fasteners, electronic components, springs, chemical processing equipment, fresh and salt water tanks, process vessels and piping, boiler feedwater heaters and other heat exchangers.
Resistance to Corrosion
Alloy 400 exhibits resistance to corrosion by many reducing media. It is one of the few alloys that can be used in contact with fluorine, hydrofluoric acid, hydrogen fluoride or their derivatives. Exceptional resistance has been proven in hydrofluoric acid in all concentrations up to the boiling point. Alloy 400 is also resistant to many forms of sulfuric and hydrochloric acids under reducing conditions. Corrosion resistance behavior in seawater is excellent.
Fabrication and Heat Treatment
Typical shaping, forming, machining and joining operations can be used when fabricating alloy 400. Hot working operations should be performed between 1200°F and 2150°F. For heavy reductions a temperature between 1700°F and 2150°F should be used. Cold working should be performed on annealed material. Heat treatments available to alloy 400 are stress equalizing, stress relieving and annealing depending on the mechanical properties desired. Stress equalizing is performed at a temperature of 575°F for a period of 3 hours followed by a rapid quench. This causes an increase in yield strength with no effects on other properties. Stress relieving is achieved at a temperature between 1000°F and 1050°F for a period of 1 to 2 hours followed by slow cooling. This will reduce stresses without producing a recrystallized grain structure and is recommended to obtain minimum distortion after metal removal. Annealing will completely soften work hardened material and is performed by holding at temperatures between 1600°F and 1800°F for 2 to 10 minutes followed by rapid quench.
2. Our Service For You
Pre-sale Service
1. Sample can be offered with sample charge and courier fee by buyer's side.
2. We have full stock,and can deliver within short time.Many styles for your choices.
3. OEM and ODM order are accepted, Any kind of logo printing or design are available.
4. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you
5. All of our products are produce by our professional workman and we have our high-work-effect foreign trade team, you can totally
believe our service.
6. We have 8 year experience of design, manufacture and sell lingerie, we cherish every order from our honor.
After you choose
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment,
3. Email you the tracking no, and help to chase the parcels until it arrive you.
After-sale choose
1. We are very glad that customer give us some suggestion for price and products.
2. If any question,please contact with us freely by E-mail or Telephone.
3.FAQ
Q: What's your minimum order quantity?
A: Our minimun quantity is 500 Kg. We also can offer you samples.
Q: What's your delivery time?
A: Our normal delivery time is 7-20 days, and it depends on your quantity and items. Of course, if you need products urgently, we
also will consider arranging it firstly.
Q: What's the price of your product?
A: Our prices are based on the material grade, size, quantity and physical performance etc. So if you can offer us the detailed
information, then we can give you the best reasonable price. Also, we can do special size and color for customers.
Q: What's your after-sales service?
A: We have two ways to handle claims by replacement and deduction. Of course, if the materialis not good used by wrong parameter
from customer, we won't be responsible.
Q: Why do you think I will want to buy from you?
A: We have advantages with 22 years of professional experiences in manufacturing & designing, advanced technology & the first-class
equipment, perfect logistics management, high-quality after-sales service and competitive price.
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611
Tel: +86 18605565290
Address: 518,XINZHUAN ROAD, SONGJIANG DISTRICT, SHANGHAI, CHINA 201612
Web: shanghaibozhong.en.made-in-china.com
){kind=link}