Customization: | Available |
---|---|
Type: | Seamless/Weld |
Technique: | Cold Rolled/Hot Rolled |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Super alloys or high performance alloys have the capacity to function under very high temperatures and severe mechanical stress, and also where high surface stability is required. They have good creep and oxidation resistance, and can be produced in a variety of shapes.
Strengthening of super alloys is performed by solid-solution hardening, work hardening, and precipitation hardening. Super alloys contain a number of elements in a variety of combinations to achieve the desired result.
Inconel 686™ is a single phase Ni-Cr-Mo-W alloy that is primarily used in extremely corrosive applications, e.g. flue gas desulfurization systems and processing plants in which mixed acids are used. This alloy is also used in fields where localized pitting is difficult.
The following datasheet will provide more details about Inconel 686™.
The following table shows the chemical composition of Inconel 686™.
Element | Content (%) |
---|---|
Nickel, Ni | 59 |
Chromium, Cr | 19-23 |
Molybdenum, Mo | 15-17 |
Iron, Fe | ≤ 5 |
Tungsten, W | 3.0-4.40 |
Manganese, Mn | ≤ 0.75 |
Phosphorous, P | ≤ 0.040 |
Sulfur, S | ≤ 0.020 |
Titanium, Ti | 0.020-0.25 |
Carbon, C | ≤ 0.010 |
The physical properties of Inconel 686™ are outlined in the following table.
Properties | Metric | Imperial |
---|---|---|
Density | 8.72 g/cm³ | 0.315 lb/in³ |
Melting point | 1338-1380 °C | 2440-2520 °F |
The mechanical properties of Inconel 686™ are provided below.
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 721.9 MPa | 104700 psi |
Yield strength (@strain 0.200%) | 364 MPa | 52800 psi |
Elastic modulus | 207 GPa | 30000 ksi |
Shear modulus | 77 GPa | 11200 ksi |
Poisson's ratio | 0.34 | 0.34 |
Elongation at break | 71% | 71% |
The thermal properties of Inconel 686™ are given below.
Properties | Metric | Imperial |
---|---|---|
Thermal expansion co-efficient (@21-100°C/69.8-212°F) | 11.97 µm/m°C | 6.650 µin/in°F |
Stock
Form |
Specification |
Supply Form |
Others |
Sheet |
Thickness:0.40-4.75mm,General Width:1000,1219,1500mm |
Whole Coil or piece of it |
Cold Annealed,Surface 2B,2E |
Plate |
Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) |
Whole Coil or piece of it |
Single hot rolling,Solid solution annealed state,Surface 1D |
Belt |
Thickness:0.10-3.0mm,Width:50-500mm |
Whole Coil or Specified size |
Cold Annealed,Surface 2B,2E |
Bar & Rod |
Rolled barΦ5-45mm,Length≤1500mm |
Polished Bar(circle,Square) |
Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm |
|||
Weld tube |
Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm |
Base on your requirement |
Use for PHE |
Seamless Tube |
Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm |
Base on your requirement |
Use for PHE |
Wire |
Outer diameterΦ0.1-13mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
Forged piece |
roundness and square alloy |
Base on your requirement |
Steel, Alloy |
Flangs |
All kinds of Flangs |
Base on your requirement |
Steel, Alloy |
Welding Material |
Coil wire Φ0.90mm/1.2mm/1.6mm |
Base on your requirement |
Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm |
|||
Welding rodΦ2.4mm/3.2mm/4.0mm |
|||
Tube |
Elbow, three links, four links, different diameter size |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate |
Raw Sheet Thickness≥2mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611
Tel:+86 18605565290