Heat-Resisting N05500/2.4375 Polished Bright Surface bar
1.Product Description
MONEL K500 is a age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.
MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium. MONEL K500 retains the excellent corrosion resistant characteristics of 400 and has enhanced strength and hardness after precipitation hardening when compared with 400. Alloy K500 has approximately three (3) times the yield strength and double the tensile strength when compared with 400. MONEL K500 can be further strengthened by cold working before the precipitation hardening
the characteristics of Monel K500
.Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
. Excellent resistance to high velocity sea water
. Resistant to a sour-gas environment
. Excellent mechanical properties from sub-zero temperatures up to about 480C
. Non-magnetic alloy
Chemical Composition(%)
| Ni |
Cu |
Al |
Ti |
C |
Mn |
Fe |
S |
Si |
| 63.0-70.0 |
Remainder |
2.30-3.15 |
.35-.85 |
.25 max |
1.5 max |
2.0 max |
.01 max |
.50 max |
Application of Monel K500
Monel K-500 alloy finds wide applications in the marine, chemical, petrochemical and shipbuilding industries. Typical applications include:
- Valve seals, pump sleeves and wear rings in marine environments - high strength and resistance to seawater
- Pump shafts for fire-fighting pumps - high strength (resulting in smaller diameter shafts) and resistance to flowing seawater
- Propeller shafts - high strength (resulting in smaller diameter shafts and thus smaller bearings) and resistance to seawater
- Fasteners e.g. bolts, used in marine atmospheres and tidal waters - resistance to chloride - containing environments
- Doctor blades and scrapers
- Towing cable armoring - high strength, non-magnetic properties and resistance to seawater
- Springs - resistance to a variety of corrosive media
- Oil well drilling equipment such as non-magnetic drill collars, valves and instrumentation sleeves - resistance to chloride-containing media and sour gas environments
- Aviation instrument components - non-magnetic properties
304LN en1.4311 stainless steel rods
| Characteristics |
Applications |
| Finished by heat treatment, pickled after cold rolled, followed by skin pass line to be brighter and more smooth surface |
Medical Instruments, Tableware |
| Bright heat treated after cold rolled |
Kitchen Utensils, Kitchen Ware,architectual Purpose |
| Has a smooth surface and a specular gloss after grinded and polished |
Construction Decoration, Elevator decoration, industrial use |
| Has a smooth surface and a specular gloss after grinded and polished |
Construction, decoration, industry |
| Polishing with No. 150 No.180 mesh Abrasives |
Bathroom, construction, electrical equipments |
304LN en1.4311 stainless steel rods
| Properties |
304 |
201 |
430 |
| C |
≤0.08% |
≤0.15% |
≤0.12% |
| Si |
≤1.0% |
≤1.0% |
≤0.75% |
| Mn |
≤2.0% |
5.5-7.5% |
≤1% |
| P |
≤0.045% |
≤0.05% |
≤0.040% |
| S |
≤0.03% |
≤0.03 |
≤0.030% |
| Cr |
18-20% |
16-18% |
16.00-18.00% |
| Ni |
8-10% |
3.5-5.5% |
≤0.60% |
| Tensile Strength (Mpa) |
≥520 |
520 |
-- |
| Yield Strength 0.2 (Mpa) |
≥205 |
275 |
-- |
| Elongation (5%) |
≥40 |
55-60 |
-- |
| Hardness |
≤187HB, ≤90HRB,≤200HV |
HRB≤183N/mm2 |
-- |
| Density(20°C g/cm3) |
7.93 |
7.93g/cm3 |
7.75g/cm3 |
| Melting Point(C) |
1398-1454 |
|
1427k |
| Resistivity(20°c) |
0.73 |
-- |
-- |
Stainless steel rods Maintenance:
(1) Regular cleaning and maintenance
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil
(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can you provide a sample for our testing before confirm the order?
A: Yes. We can provide sample to you for approval before you place an order to us. Free sample is available if we have stock.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up.
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611
Tel: +86 18605565290
Address: 518,XINZHUAN ROAD, SONGJIANG DISTRICT, SHANGHAI, CHINA 201612
Web: shanghaibozhong.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}