Nickel Alloy 2.4375(monel k500) Seamless steel /Plate
1.Product Description
Bright Round Bar Nickel Alloy Monel K500
MONEL K500 is a age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.
MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium. MONEL K500 retains the excellent corrosion resistant characteristics of 400 and has enhanced strength and hardness after precipitation hardening when compared with 400. Alloy K500 has approximately three (3) times the yield strength and double the tensile strength when compared with 400. MONEL K500 can be further strengthened by cold working before the precipitation hardening
the characteristics of Monel K500
.Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
. Excellent resistance to high velocity sea water
. Resistant to a sour-gas environment
. Excellent mechanical properties from sub-zero temperatures up to about 480C
. Non-magnetic alloy
Chemical Composition(%)
| Ni |
Cu |
Al |
Ti |
C |
Mn |
Fe |
S |
Si |
| 63.0-70.0 |
Remainder |
2.30-3.15 |
.35-.85 |
.25 max |
1.5 max |
2.0 max |
.01 max |
.50 max |
Physcial Property
| Condition |
Tensile (ksi) |
.2% Yield (ksi) |
Elongation % |
Hardness |
| Hot-Finished/Aged |
140-190 |
100-150 |
30-20 |
27-38 HRC |
| Hot Finished/Annealed |
90-110 |
40-60 |
45-25 |
75-90 HRB |
| Hot Finished/Annealed/Aged |
130-165 |
85-120 |
35-20 |
24-35 HRC |
| Cold-Drawn/Aged |
135-185 |
95-160 |
30-15 |
25-41 HRC |
| Cold-Drawn/Annealed/Aged |
130-190 |
85-120 |
30-20 |
24-35 HRC |
Application of Monel K500
Monel K-500 alloy finds wide applications in the marine, chemical, petrochemical and shipbuilding industries. Typical applications include:
- Valve seals, pump sleeves and wear rings in marine environments - high strength and resistance to seawater
- Pump shafts for fire-fighting pumps - high strength (resulting in smaller diameter shafts) and resistance to flowing seawater
- Propeller shafts - high strength (resulting in smaller diameter shafts and thus smaller bearings) and resistance to seawater
- Fasteners e.g. bolts, used in marine atmospheres and tidal waters - resistance to chloride - containing environments
- Doctor blades and scrapers
- Towing cable armoring - high strength, non-magnetic properties and resistance to seawater
- Springs - resistance to a variety of corrosive media
- Oil well drilling equipment such as non-magnetic drill collars, valves and instrumentation sleeves - resistance to chloride-containing media and sour gas environments
- Aviation instrument components - non-magnetic properties
Finishings of Stainless Steel Sheets
| No.03 |
Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.
|
Kitchen utensils,Building, construction
|
| No.04 |
Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.
|
Kitchen utensils, Building construction,
Medical equipment.
|
| HL |
Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
|
Building Construction.
|
| Mirror No.08 |
Shinning like a mirror
|
Builiding Construction |
Stainless steel sheet surface finish characteristics
| 2B |
The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. |
| No.1 |
Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc |
| No.4 |
Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL |
Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
| BA |
Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
| 8K |
The product have excellent brightness and prefer reflexivity can to be the mirror. |
Stainless steel Sheets Maintenance:
(1) Regular cleaning and maintenance
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil
(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can you provide a sample for our testing before confirm the order?
A: Yes. We can provide sample to you for approval before you place an order to us. Free sample is available if we have stock.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up.
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611
Tel: +86 18605565290
Address: 518,XINZHUAN ROAD, SONGJIANG DISTRICT, SHANGHAI, CHINA 20161
shanghaibozhong.en.made-in-china.com shanghaibozhong.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}